Combo PTK Chipmunk PNP Brushless 3 servos - Free RC Plane

Combo Chipmunk Park Flyer PNP in lightweight foam: the kit optimized by SCIENTIFIC MHD

Why choose the Chipmunk SF SCIENTIFIC MHD?

An easy-to-fly RC plane

The Chipmunk is particularly easy to fly thanks to the good power of its Brushless motor.

Takeoff can be done from a hard surface runway or by simply launching the model, grasping it from the top of the fuselage.

Just launch the model straight to achieve a clean and gradual takeoff.

Its lightness also makes the initial moments of flight easier and allows you to quickly get used to the controls.

Enjoyable and accessible flight

In flight, the Chipmunk is both stable and enjoyable to pilot. In calm conditions, it can fly relatively slowly while maintaining stable behavior.

Its low weight and low wing loading limit the risk of stalling, making the model reassuring during low-speed maneuvers.

The plane also has a nice appearance in flight, true to the spirit of the Super Chipmunk.

At full throttle, the Brushless motor allows the model to accelerate briskly and perform realistic aerobatic maneuvers typical of this model.

The Chipmunk is enjoyable both to fly and to watch in action.

While not a beginner RC plane, it is stable and predictable enough to suit a majority of pilots, including those with limited flying experience.

Ultimately, this model is one of the pleasant surprises.

Good flight time with its LiPo 2S 500 mAh

With its LiPo 2S 500 mAh battery, the PT-19 offers up to 4 to 8 minutes of flight time, depending on throttle management.

This flight time is slightly above average for a model in this category.

The excellent efficiency of the Brushless motor significantly contributes to this result, while maintaining sufficient power to fully enjoy the model's behavior.

An extremely advantageous Combo price

Why choose a Protronik Combo from Scientific MHD?

Buying an RC plane is one thing.

Choosing the right motor, suitable controller, servos, propeller, and compatible battery is another.

This is often the most delicate step, even for an experienced modeler.

With the PTK Combo offered by SCIENTIFIC MHD, all this work has already been done for you.

Our team of test pilots has assembled several kit examples and tested different combinations of motors, controllers, propellers, and LiPo batteries to select the configuration that offers the best compromise between power, autonomy, reliability, precise controls, and flight quality.

By ordering this Combo version, you not only benefit from a more advantageous price than purchasing the different elements separately.

You also have the certainty of receiving a configuration perfectly adapted to the model, already validated in real conditions.

The time you would have spent comparing accessories, researching compatibilities, or conducting multiple tests will simply be saved and can be devoted to what really matters: flying at your favorite field.

A fully validated selection of accessories

Each component of this Combo version has been chosen after several tests to achieve a perfectly balanced set.

3 digital micro servos

The model is equipped with 3 micro servos PTK 7350 MG-D (ref. S04377350).

Their robust metal gears, precision, speed, and torque provide excellent precise and reliable control of the control surfaces.

Protronik Brushless Motor

The Brushless motor 2210-1700 Kv (ref. S03872212) was chosen for its excellent power-to-weight ratio.

Protronik 32 Bits Brushless Controller

The highly efficient Brushless controller 18 A (ref. S03878018) is perfectly sized for this motor.

Its 32-bit processor optimizes the operation, efficiency, and flexibility of the motor, and its powerful BEC ensures the reliability of the receiver and the operation of the 3 servos.

Black-Lithium Li-Po Battery

Power is provided by a Li-Po 2S 500 mAh battery (ref. Z03L9050320).

Its capacity offers an ideal compromise between lightness, autonomy, flight performance, and low cost.

Quality accessories DUBRO

All the accessories needed for the controls come from the American brand DUBRO known for its quality.

Scientific MHD has added the following accessories: Micro Push Rod, Control Horns, aileron controls, and mini servos from the famous American brand.

Discover the full range of DUBRO accessories.

An exclusive manual developed by SCIENTIFIC MHD

Because our technical team has actually assembled and tested this configuration, we were able to create an exclusive supplementary manual specially dedicated to this Combo version.

You will find:

• practical assembly tips;
• recommendations for positioning the various equipment;
• engine and controller settings validated during testing;
• many tips to facilitate commissioning.

This documentation helps to avoid the most common assembly errors and quickly enjoy a perfectly tuned aircraft.

Assembly of accessories and Protronik Brushless motorization.

Originally, this model comes with a brushed motor gearbox mounted in the fuselage.

Mounting the Protronik elements supplied in the combo requires prior disassembly of the propeller cone and brushed motor.

This step is easy to perform and is described in the supplementary manual provided with the Combo.

Mounting the Protronik Brushless motor 2210-1700 Kv requires inverting the motor shaft.

This step is simple for a modeler and is explained in the supplementary manual.

Technical specifications of the Chipmunk Combo:

Wingspan: 833 mm

Mass: Approximately 310g

Functions: Elevator, ailerons, (rudder if 3 servos)