Paint for model RCC 1013 LEXAN Fluorescent Purple Birdie

150ml RC LEXAN Fluorescent Violet Birdie Spray Can. Sold individually.RC Lexan paints have been specially designed for decorating Lexan or polycarbonate transparent bodies of RC cars. They are applied on the inside of the body. They are fuel resistant.For best results

• 1) Always degrease the inside of the body
• 2) Mask off areas you do not wish to paint
• 3) Shake the paint can vigorously for 2 minutes
• 4) Spray the paint on the inside of the body from a distance of 20 to 30cm above the surface in a thin, even layer (always start with the darkest shade)
• 5) Wait 5 minutes before applying another coat or removing masking tape
• 6) At the end of use, turn the can upside down and press the nozzle until the paint stops coming out, this will prevent the nozzle from clogging

Note: Fluorescent paints have a drying time of 30 minutes and should always be covered with white as a base coat to achieve the fluorescent effect.

Hazard statements:

• Repeated exposure may cause skin dryness or cracking
• Extremely flammable aerosol
• Pressurized container: may burst if heated
• Causes serious eye irritation
• May cause drowsiness or dizziness

Precautionary statements:

• Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking
• Do not pierce or burn, even after use
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
• If eye irritation persists: Get medical advice/attention
• Store in a well-ventilated place. Keep container tightly closed
• Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F