To ride, fly, sail, everything is there at MHD!
The SEAGULL MODEL DHC-1 Chipmunk SEA 304 is a semi-scale remote-controlled airplane with a wingspan of 2.03 m, designed for a 20 cm³ gas engine or a brushless electric motor of 1,100 to 2,000 W.
Its wooden construction, functional flaps, and detailed finish make it a model intended for aviation and RC piloting enthusiasts.
RC Plane DHC-1 Chipmunk Gray 2.03 m - SEAGULL MODEL
|
|
|
Gasoline Engine for EPHIL 20cc Single-Cylinder Rear Exhaust Aircraft Engine€279.95 - ref. S074120R |
|
|
|
EPHIL 20cc PRO gasoline engine with starter and rear exhaust S074120RP€369.95 - ref. S074120RP |
|
|
|
Onboard accessory TWO-BLADE WOODEN PROPELLER 15 x 8€12.95 - ref. S074P1508B |
|
|
|
Onboard accessory TWO-BLADE WOODEN PROPELLER 16 x 6€13.60 - ref. S074P1606B |
|
|
|
Servo Standard Digital Coreless 8840 TG-D Protronik€49.00 - ref. S04378840 |
|
|
|
Radio control system FLYSKY Radio 6V FS-i6X-32AO Mode 2 2.4GHz€69.95 - ref. Z01013 |
|
|
|
Radio control system FLYSKY Radio 6V FS-i6X-32AO Mode 1€69.95 - ref. Z010131 |
|
|
|
Set for radio radio control PTR-6A V2 6-way + Lipo battery€94.95 - ref. S03770100V |
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Are you looking for a large radio-controlled plane that replicates a historic training aircraft?
The DHC-1 Chipmunk from SEAGULL MODEL is a flying model that combines a recognizable silhouette, traditional construction, and equipment suitable for radio-controlled piloting.
With its 2,032 mm wingspan, this model offers interesting dimensions for fans of large RC planes and semi-scale models.
Offered in ARTF (Almost Ready To Fly) version, the SEA 304 benefits from significant factory preparation.
The fuselage and main components are already built and covered.
The modeler must still proceed with the final assembly, install the engine, servos, and the entire radio equipment before the first flight.
This formula allows you to enjoy a wooden plane without having to fully construct it.
The DHC-1 Chipmunk features a wingspan of 2,032 mm and a length of 1,452 mm.
Its wing area of 60.5 dm² and announced weight of 4.7 kg place this model in the category of large radio-controlled planes.
Its traditional balsa and plywood structure helps reproduce the construction characteristics of vintage aircraft.
The kit has removable wings with an aluminum joiner tube, facilitating the transport and storage of the model. The tail, fuselage, and wings benefit from a covered finish. The engine cowl and wheel fairings are made of fiberglass.
The cockpit is also detailed with its pilots, to enhance the scale appearance of this radio-controlled plane.
The fixed landing gear is equipped with suspension and wheel fairings.
A steerable tail wheel completes the installation. Functional flaps provide an additional configuration for approach and landing phases.
One of the advantages of the SEAGULL MODEL SEA 304 is the ability to choose between two types of propulsion. For fans of thermal RC planes, the manufacturer recommends a 20 cm³ two-stroke gasoline engine.
This displacement matches the size of the aircraft and allows for an installation suited to its dimensions and weight.
The kit also provides for a brushless electric motor installation. SEAGULL recommends a power range between 1,100 and 2,000 W, paired with an 85 A brushless controller.
The power supply is planned with an 8S to 9S LiPo battery and a propeller between 17 x 8 and 19 x 10 inches.
This option allows for an electric configuration without having to significantly modify the plane's design.
The choice between thermal and electric propulsion will depend on the pilot's habits, available equipment, and preferences in terms of maintenance and use.
Both solutions are provided by the manufacturer in the model's design.
The DHC-1 Chipmunk requires a radio control with at least 5 channels and an installation comprising 7 servos.
This configuration allows for independent control of the ailerons, flaps, elevator, rudder, and engine.
The installation includes two servos for the ailerons, two for the flaps, one for the elevator, one for the rudder, and one for the engine control.
It is therefore important to plan the necessary number of servos before starting the assembly and to check their compatibility with the plane's controls.
For the ailerons and flaps, SEAGULL indicates a minimum torque of 5.8 kg/cm at 4.8 V or 7.2 kg/cm at 6 V.
The choice of servos should also consider their reliability, precision, and the forces transmitted to the control surfaces.
A properly sized radio installation is essential to exploit the various functions of this large RC plane.
The SEAGULL DHC-1 Chipmunk comes with the main construction elements and accessories provided by the manufacturer: fuselage, wings, tail, canopy, engine cowl, landing gear, wheel fairings, wing joiner tube, tank, and assembly accessories.
The hinges are pre-installed, but their gluing must be done according to the instructions in the manual.
The kit is not a ready-to-fly plane immediately. You must separately plan the chosen propulsion, servos, radio control, receiver, and the necessary power equipment.
For the electric version, you will also need a suitable LiPo battery and charger. For the thermal version, the engine, its power supply, and the necessary accessories for its operation will need to be installed.
| Technical Specifications | SEAGULL MODEL DHC-1 Chipmunk SEA 304 |
|---|---|
| Type | Semi-scale ARTF radio-controlled aircraft |
| Wingspan | 2,032 mm |
| Length | 1,452 mm |
| Wing area | 60.5 dm² |
| Announced weight | 4.7 kg |
| Construction | Balsa and plywood |
| Thermal motorization | 20 cm³ 2-stroke gasoline engine |
| Electric motorization | Brushless motor from 1,100 to 2,000 W |
| Electric controller | 85 A |
| Electric battery | LiPo 8S to 9S |
| Recommended electric propeller | 17 x 8 to 19 x 10 inches |
| Radio control | Minimum 5 channels |
| Number of servos | 7 |
| Functions | Ailerons, elevator, rudder, flaps, and engine |
| Landing gear | Fixed with suspension and wheel fairings |
| Flaps | Functional |
| Version | ARTF – assembly and equipment to be installed |
| Manufacturer | SEAGULL MODEL |
| Reference | SEA 304 |
The De Havilland Canada DHC-1 Chipmunk is a two-seater aircraft designed in Canada after World War II. Its first flight took place in 1946.
It was notably developed to provide initial pilot training and to succeed the famous De Havilland Tiger Moth.
Its low-wing monoplane design, classic landing gear, and tandem two-seater cockpit give it a distinctive silhouette.
Used in several air forces and by civilian flight schools, the Chipmunk has made a mark in the history of aviation training.
It remains appreciated today by collectors and vintage aircraft enthusiasts.
With this radio-controlled reproduction, SEAGULL MODEL offers modelers the chance to rediscover the lines of this historic aircraft in a 2.03 m format suitable for RC piloting.
Customers who bought this product also bought: