-
News to come
RC Plane Dirty Birdy 61-75/ 60E fixed gear - SEAGULL SEA 433
RC Plane Dirty Birdy 65 aerobatic 1.64 m - SEAGULL MODEL
The SEAGULL MODEL Dirty Birdy 65 SEA433 is a classic RC aerobatic plane with a 1.64 m wingspan, delivered with fixed landing gear.
Its balsa and plywood construction reinforced with carbon accepts a .61 to .75 two-stroke engine, a .91 four-stroke engine, or a 60E brushless electric propulsion.
RC Plane Dirty Birdy 61-75/ 60E fixed gear - SEAGULL SEA 433
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
An RC aerobatic plane inspired by American Pattern models
The Dirty Birdy 65 from SEAGULL MODEL takes the lines of an iconic American radio-controlled aerobatic plane.
Its design prioritizes trajectory precision, figure consistency, and good energy retention.
This model is aimed at pilots looking for an RC aerobatic plane capable of performing sporty maneuvers while remaining pleasant in leisure flight.
With its 1,640 mm wingspan and flight-ready weight of about 3.6 kg, the SEA433 offers a format suitable for classic aerobatics.
Its symmetrical wing profile and tailplane promote consistent behavior in various flight attitudes.
It allows for wide loops, barrel rolls, and Pattern-type figure sequences.
A balsa and plywood construction reinforced with carbon
A fuselage designed for flight precision
The fuselage and wings benefit from a fully sheeted balsa and plywood construction.
This architecture provides torsional rigidity and a consistent aerodynamic finish.
Carbon fiber reinforcements are integrated into stress-prone areas, while carbon tubes ensure the alignment and support of the wing and horizontal stabilizer.
The wing disassembles into two parts, and the horizontal stabilizer is also detachable.
This design facilitates the transport and storage of the plane without sacrificing structural rigidity.
The two aileron servos have independent mounts, allowing separate control adjustments and programming adaptation for aerobatics.
A SEA433 version with fixed landing gear
This reference corresponds exclusively to the version equipped with fixed gear.
It uses piano wire legs, CNC machined aluminum mounts, and lightweight polyurethane rubber wheels.
The fuselage also has reinforced areas and prepared housings to accommodate retractable electric gear, but this system is not included with the SEA433.
The removable fiberglass engine cowl, factory-painted, facilitates access to the motorization.
A large quick-release upper canopy allows access to onboard equipment.
The joints between the wing and fuselage are provided as pre-cut PET parts matching the decoration. The heat-shrinkable covering is available in Pearl Blue or Cub Yellow finish.
Thermal or electric motorization for the Dirty Birdy 65
Configuration with glow thermal engine
SEAGULL MODEL offers two thermal motor options: a .61 to .75 two-stroke engine or a .91 four-stroke engine.
The recommended propellers are a 12 × 7 or a 13 × 6 sport type.
The tunnel under the fuselage allows for the installation of an internal resonator.
A reinforced mounting point is provided to secure this equipment.
6S brushless electric configuration
The Dirty Birdy SEA433 can also accommodate electric propulsion.
The manufacturer recommends a 60E class brushless outrunner motor, paired with an 80 to 100 A controller with a minimum 8 A BEC.
Power is supplied by a 6S LiPo battery of 4,500 to 5,500 mAh, with a minimum discharge rate of 45C.
Two sizes of electric propellers are recommended: 14 × 8E or 15 × 8E, suitable for Pattern-type use.
The lower tunnel can also aid in cooling the electric installation.
It is important to adhere to the motor and controller specifications when choosing a compatible propeller and battery.
Required radio control and servos
The manufacturer specifies a minimum 6-channel radio control and five servos for standard installation.
An 8-channel programmable radio is recommended for more adjustment possibilities, especially with the two independent aileron servos.
This configuration facilitates control adjustments and programming suited to aerobatic maneuvers.
The selection of servos should consider the forces exerted on the control surfaces and the characteristics of the chosen installation.
For an aerobatic plane of this size, it is important to prioritize reliable servos with torque and precision suited to the practice.
The manufacturer does not specify a minimum torque, so it is advisable to check this data based on the chosen servos.
Technical characteristics of the SEAGULL MODEL Dirty Birdy 65 SEA433
| Reference | SEA433 |
|---|---|
| Type | Classic Pattern ARF RC aerobatic plane |
| Version | Fixed landing gear |
| Wingspan | 1,640 mm |
| Length | 1,447 mm |
| Wing area | 45.36 dm² |
| Flight weight | Approximately 3,600 g depending on motorization |
| Wing loading | Approximately 79 g/dm² at 3,600 g |
| Construction | Balsa and plywood, carbon reinforcements and tubes |
| 2-stroke engine | .61 to .75 |
| 4-stroke engine | .91 |
| Thermal propeller | 12 × 7 or 13 × 6 |
| Electric motor | Brushless outrunner class 60E |
| Electric controller | 80 to 100 A with a minimum 8 A BEC |
| Battery | LiPo 6S, 4,500 to 5,500 mAh, minimum 45C |
| Electric propeller | 14 × 8E or 15 × 8E |
| Radio control | Minimum 6 channels, 8 channels recommended |
| Required servos | 5 |
| Landing gear | Fixed, piano wire legs, CNC aluminum mounts and PU wheels |
Joe Bridi and the history of the Dirty Birdy in radio-controlled aerobatics
The Dirty Birdy was designed in the mid-1970s by Joe Bridi, a recognized American designer in the field of model aviation.
It represents an evolution of American Pattern aerobatics that followed the success of the Kaos series.
Its geometry is distinguished by a greater wing sweep, a straight trailing edge, an elongated rear lever arm, and fully symmetrical profiles on the wing and tail.
These choices promote trajectory precision, energy conservation, and consistency of maneuvers.
With this modernized ARF version, SEAGULL MODEL incorporates the design principles of the original Dirty Birdy with a carbon-reinforced wood construction and options for thermal or electric motorization.
The SEA433 retains the fixed gear, in the spirit of classic Pattern aerobatic planes.
- Degree of finish
- Pre-assembled (RTF)
- Engines
- Thermal
- Product types
- Radiocomed aircraft
Sport 8cc & + - States
- News to come