-
-€50.00
-
Promotion
RC car
Z630007K
Remote Control Car GUNNER Monster 6S 1/8 Kit Version
The Kit version to assemble of the GUNNER MONSTER 1/8.
Gunner 6S 1/8 MHDPRO: push all the limits of RC off-road.
Get ready to experience the ultimate modeling experience with the Gunner 6S at 1/8 scale from MHDPRO.
Designed for thrill-seekers, this all-terrain monster is built for bashing, extreme crawling, and spectacular jumps.
With formidable power and unrivaled toughness, it will allow you to push the limits of RC driving on all types of terrains
2.15.1.0
Save €50.00
€349.95
€299.95
VAT included
Remote Control Car GUNNER Monster 6S 1/8 Kit Version
Plus de detailsRemote Control Car GUNNER Monster 6S 1/8 Kit Version
€299.95
€349.95
Ajout dans le panier en cours ...
Part for car electric car BL 2000KV Gunner 6S TR & MT
€174.95 - ref. Z63T336092
Part for electric car controller BL 150A Gunner 6S TR & MT
€174.95 - ref. Z63T336093
Combo pack spécial GUNNER 6S - 2 Batteries Lipo + sangles longues
€165.95 - ref. Z03L50PACK6S
Ultimate Pro DUO V2 2 x 120W radio -controlled battery charger
€109.95 - ref. Z022056
Ultimate Pro 10 / 100W radio -controlled battery charger
€59.95 - ref. Z032060
Charger for accusation for radio controlled device XT-90 load cord
€8.70 - ref. S04415165
Articles supplémentaires sélectionnés
Total(tax incl.)
€
Shipping within 48 hours 
335203 products in stock 
Customer service 
The all-new GUNNER Monster 6S is an ultra-performing and ultra-resistant 1/8 scale remote-controlled vehicle that allows you to push the limits.
Fully to assemble
You can use it in a friendly way like your GUNNER Electric Buggy or use it to practice Bash and push your limits.
RC Bashing involves driving your remote-controlled car at full speed without following any rules, making the highest jumps, and even barrel rolls.
Racing involves a professional track with a designated area, rules, regulations, and intentions.
You don't drive an RC car just for fun, but rather to win.
To be as performing, the GUNNER Monster 6S has been completely modified compared to the Buggy of the same name.
This 1/8 brushless Monster has a 4-wheel drive system with three reinforced differentials that precisely distribute the strong power to each of the four wheels.
A red anodized aluminum central reinforcement bar strengthens the chassis to withstand all the challenges you will put it through.
This new chassis is equipped with all high-quality ball bearings.
The new front hubs with ball joint system, Big Bore hydraulic shocks, front and rear shock mounts as well as many parts distributed on the chassis are red anodized aluminum.
The shocks have dust boots to protect them from dust and provide maximum and long-lasting use without seizing.
They have 3 different anchoring holes on the shock mounts, innovative upper protections.
The geometry of the trains is fully adjustable and front and rear anti-roll bars are present on the chassis.
The new anodized aluminum motor mount has been designed to allow you to disassemble and change the motor pinion in record time as if you were in an R/C competition pit.
The large, highly resistant front suspension arms have enough flexibility to absorb shocks.
The receiver compartment is dust and splash proof.
The motor crowns and pinion are made of hardened steel.
The stunning and impressive aerodynamic bodywork, painted and decorated, will look great on the tracks you take to impress your friends.
The GIANT tires on this Monster truck version with high-grip rubber will ensure maximum traction of the vehicle on all types of surfaces such as asphalt, grass, and dirt.
Other features:
- Transmission crown 49 Teeth with very resistant hardened steel 12-tooth pinion
- Transmission system with hardened steel drive shafts
- 17mm red anodized aluminum wheel hexes
- Anodized aluminum Ackerman bar
- Quick and easy access to the transmission for adjustment or maintenance thanks to a well-designed new motor mount
- High-strength adjustable tie rods
- Front and rear anti-roll bar system
- 5mm red anodized aluminum F/R shock towers
- Reinforced composite nylon chassis side guards for body protection
- Very resistant front and rear composite bumpers
- Very resistant front and rear chassis reinforcements
- High-quality BTR screws
- Pre-painted body included
- Included wheels and tires
Items to be purchased separately:
A 2-channel remote control: we recommend the MHD3S reference Z01003
A minimum 15kg steering servo: We recommend the PROTRONIK S04378840 servo
A 150A Brushless controller: We recommend the HOBBYWING Z63T336093
A 2000Kv Brushless motor: We recommend the HOBBYWING Z63T336092
Regarding the choice of battery/batteries:
2 LiPo 2S batteries
2 LiPo 3S batteries
1 LiPo 4S battery
1 LiPo 6S battery
With the GUNNER Monster 6S, you can navigate the most rugged terrains, beyond limits.
Master the power of the 6S brushless and overcome all obstacles with a balance and control that only a superior quality racing vehicle can provide.
The GUNNER 1/8 6S is also available in its Truggy version.
2.15.1.0
- Degree of finish
- To rise
- Ladder
- 1/8
- Steering level
- Experimented
- Product types
- Radio -controlled cars
- States
- Promotion
Complementary items
Customers who bought this product also bought:
-
-€24.95
-
Promotion
-
Article sold out
Spare parts
Optional parts (Tuning)
Products you might like
-
-€100.00
-
Promotion
-
-€65.05
-
Promotion
-
-€50.00
-
Promotion
