Combo Protronik Cessna E10 EPP 960 mm RC Kit

A Cessna RC in EPP designed for learning and progressing

With its scale landing gear, the Cessna E10 can easily take off from a hard surface runway or a very short mown grass runway.

Thanks to its light weight and the Protronik brushless motorization particularly suitable for the model, it can also be hand-launched when the terrain is not flat enough: tall grass, sand, or uneven ground.

This versatility makes it a particularly practical leisure EPP RC plane, suitable for both training sessions and leisure flights.

For this version, Scientific has selected a motorization and accessories from Protronik perfectly suited for the Cessna E10.

The Combo thus combines the Dancing Wings kit and all the elements necessary for its equipment: brushless motor, controller, propeller adapter, propeller, LiPo battery, and four digital servos.

The Cessna E10 incorporates the features that make an EPP kit so appealing.

The choice of EPP is particularly relevant for this type of model. This foam is appreciated in aeromodelling for its lightness and good resistance to minor impacts.

It allows you to enjoy an RC plane for leisure without having to take the same precautions as with a very fragile traditional construction.

The Cessna E10 is aimed at hobbyists looking for a buildable EPP plane kit, but who then want to have a truly versatile model in the field.

Assembly is part of the modeling pleasure, then the model can be used to increase flight sessions without complex setup.

A model suitable for accompanied learning

The Cessna E10 can be an interesting support for discovering how to pilot a 4-channel RC plane.

For a first flight, I naturally recommend the accompaniment of an experienced pilot or a club instructor.

The center of gravity, control direction, and deflections should be checked before the first flight.

Once these settings are made, the model offers a particularly practical format for learning to master the main flight phases: takeoff, climb, turns, approach, and landing.

Its high-wing configuration makes it a RC plane for beginners, preferably used with the accompaniment of an experienced modeler.

However, its appeal does not stop at the beginning of learning.

An experienced pilot can use it as a leisure RC plane, easy to transport and quick to prepare before a flight session.

A lightweight and easy-to-transport EPP airframe

With its 960 mm wingspan and approximately 700 mm length, the Cessna E10 remains compact enough to be easily transported to a modeling field or a suitable flying area.

The wing and fuselage combine EPP foam with structural elements to ensure the necessary rigidity in flight. The detachable wing also facilitates the storage and transport of the model.

This design meets a common demand from modelers: having a light, sturdy, and compact EPP RC plane that can be easily taken to the field without having to transport a large model.

The low weight of the Cessna E10 also contributes to its versatility. When conditions allow takeoff on wheels, the landing gear provides a realistic and pleasant behavior. In less favorable terrain, hand launching is a practical alternative.

The Cessna E10 Combo with Protronik equipment

For this version, Scientific does not just offer the kit alone.

Like other Protronik Combos for RC planes, this version combines a kit to build with selected motorization and equipment.

We have selected a complete configuration to equip the Cessna E10 with Protronik components suitable for its size and use.

The goal is simple: to offer a RC plane kit with complete motorization, without requiring the modeler to separately search for each electronic component and verify their compatibility.

Protronik 2210-1100 brushless motor

The Combo comes with a Protronik 2210-1100 brushless motor, reference S03872210.

This electric motor provides an interesting balance between power, weight, and size for a model of this size.

Combined with a 3S LiPo battery and the propeller selected for the Combo, it provides a propulsion suitable for both wheel takeoffs and hand launches.

The brushless motor also provides the flexibility needed to precisely manage power during different flight phases.

Protronik BF32 18A controller

The motorization is paired with the Protronik BF32 18A controller, reference S03878018.

The choice of the controller is an integral part of the configuration balance. It must be adapted to the motor and propeller used to maintain a consistent and reliable setup.

In this Combo, the controller is selected based on the chosen engine for the Cessna E10.

APC SF 8 x 3.8 Propeller and Protronik Adapter

The Combo includes an APC SF 8 x 3.8 propeller, paired with a 3mm shaft / M5 short propeller adapter, reference S0445130.

The APC propeller completes the propulsion configuration chosen by Scientific.

The adapter, on the other hand, ensures the connection between the motor and the propeller.

These components are included in the Combo to prevent the modeler from having to separately select the mechanical components needed for the motor installation.

A 3S 1300 mAh LiPo Battery Suitable for the Cessna E10

The Combo also includes a 3S 1300 mAh LiPo propulsion battery, reference Z03L9130330.

Choosing a 3S battery allows for full utilization of the selected brushless motor for the model while maintaining a compact setup.

The battery's positioning also contributes to the center of gravity adjustment.

As with any RC airplane kit, the balance must be carefully checked before the first flight. The battery can then be moved to achieve the recommended adjustment.

To better understand the choice of a battery suitable for an RC airplane, check out our guide "How to choose a LiPo battery for RC airplanes".

Four Protronik Digital Servos for Flight Controls

The Cessna E10 is equipped with four Protronik S0437452 MG-D servos.

These four servos allow for outfitting the model's various flight controls with components selected for the Combo.

The choice of digital servos with metal gears provides a solution consistent with Scientific's aim to offer a complete and durable equipment.

This equips the modeler with the necessary elements to install the controls without having to determine the size and type of servos to use.

An EPP RC Airplane Kit that Preserves the Joy of Building

The Cessna E10 remains primarily a buildable RC airplane kit.

The assembly allows for gradually discovering the model's structure, installing the propulsion and controls, and making adjustments before the first flight.

This formula will interest modelers looking for more than just a ready-to-fly RC airplane.

Building one's airplane is an integral part of aeromodelling and also helps in better understanding the model's operation before flying it.

Additionally, EPP facilitates handling during assembly and provides a suitable solution for an airplane intended for leisure flying.

A Versatile Cessna RC Airplane for the Field

The Cessna E10 easily fits in a bag or vehicle due to its compact size. Once on the field, its setup remains quick.

On a hard runway or very short grass, the landing gear maintains the realism of takeoff and landing.

When the terrain is too uneven, the model's light weight allows for hand launching.

This versatility is one of the main advantages of this EPP RC airplane. It can accompany a pilot looking to improve skills, but also serve as a leisure model for outings where a simple-to-transport and enjoyable-to-fly airplane is desired.

A Combo Designed to Simplify Equipment Selection

With the Cessna E10 Protronik Combo, Scientific offers a solution different from just a bare kit.

The choice of propulsion components and servos is already made for the modeler.

The brushless motor 2210-1100, BF32 18A controller, propeller adapter, APC SF 8 x 3.8 propeller, 3S 1300 mAh LiPo battery, and four Protronik servos make up a coherent configuration around the Cessna E10.

The result is a buildable and equipable EPP RC airplane kit, designed to combine the joy of assembly with an electronic configuration selected by Scientific.

The Cessna E10 thus retains the spirit of traditional modelling while offering a simple and accessible setup in the field.

Supplementary Scientific Manual to Facilitate Assembly

The Scientific team has also created a specific supplementary manual for the Cessna E10.

It not only replaces the manufacturer's documentation but also provides the necessary information to ease the various assembly steps and specifies potential problematic areas.

Some errors, inaccuracies, or inconsistencies in the original manufacturer's manual are identified and corrected in this supplementary documentation.

The goal is simple: to enable the modeler to follow a clearer assembly process and avoid errors that could complicate the construction or adjustment of the model.

For further information, also check out our guide dedicated to choosing and assembling an RC airplane kit.

If you are discovering the models to build, our guide to choose and assemble an RC airplane kit will help you prepare your project.

The advantages of the SCIENTIFIC MHD Combo

By choosing the scientific Combo, you benefit from numerous advantages:

1. The best accessories are already selected

Our technical team has done all the research, assembly, and validation work. You can be sure to have an optimal configuration without worrying about the compatibility of the different components.

2. An exclusive technical manual

You receive documentation enriched with assembly tips, equipment placement, as well as the motor and controller settings used during our tests.

3. An advantageous Combo price

By ordering your SCIENTIFIC MHD Combo, you benefit from an attractive pricing offer while saving many hours of research, comparison, and fine-tuning.

If your goal is to make even greater savings, then we invite you to check out our Protronik Combo offers on the PT-19 in kit or the Chipmunk, because in these Combos we offer you the airplanes, you only pay for the accessories.

Looking for another RC airplane in EPP kit?

The Cessna E10 focuses on learning and leisure flying.

If you want to explore other models to build equipped by Scientific, also discover our Protronik Combos, including the Brushless PT-19 Combo PT-19, the Sakura Plus Combo, the FOX XL Dancing Wing Combo or the Raccoon 965 mm Combo.

The Sakura Plus offers a different approach, more oriented towards sport flying.

For a model more oriented towards aerobatics, also discover the Protronik Raccoon 965 mm Combo.