Cyanoacrylate glue
S165PT22
Cyanoacrylate Adhesive POLY ZAP - 14 grams
The POLY-ZAP is a cyanoacrylate adhesive specially developed for modern plastics such as Lexan and Delrin.
Lexan is one of the most difficult plastics to bond, and POLY-ZAP was precisely designed to solve this problem.
- High-performance cyanoacrylate adhesive for lexan, delrin, nylons, polycarbonates, rubber, etc.
- Ideal for canopies and ARF models.
- Remains transparent if accelerator is not used.
- Best performance on: lexan, rubber, delrin, nylons, and most plastic materials.
- 14-gram bottle.
€8.30
VAT included
Cyanoacrylate Adhesive POLY ZAP - 14 grams
Plus de detailsCyanoacrylate Adhesive POLY ZAP - 14 grams
€8.30
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
335384 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments
4.6/5
★ ★ ★ ★ ★
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
335384 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments
4.6/5
★ ★ ★ ★ ★
Specialist since 1955
The POLY-ZAP is a special cyanoacrylate adhesive developed for modern plastics such as Lexan and Delrin.
Lexan is one of the most difficult plastics to bond, and POLY-ZAP was specifically designed to solve this problem.
POLY-ZAP also works on:
- Delrin,
- polycarbonate,
- ABS,
- styrene,
- nylon,
- Starboard (marine HDPE),
- as well as most acrylics.
It also adheres to many plastic films and painted surfaces.
Modeling Applications
Poly-Zap is ideal for modern ARF models.
Among its many applications:
- ABS engine cowls,
- Lexan RC car bodies,
- fiberglass repairs,
- RC boat parts,
- automotive finishing elements.
Outdoor and Marine Applications
Nautical accessories and outdoor equipment made of Starboard plastic (marine HDPE) can be assembled with POLY-ZAP.
This material particularly withstands:
- UV rays,
- moisture,
- marine environments,
- harsh outdoor conditions.
Usage Tips
Apply small drops of POLY-ZAP on one of the surfaces to be assembled and then put the parts in contact.
For large assemblies or long joints:
- apply small drops spaced 6 to 12 mm apart on one surface,
- along the entire length of the joint,
- then assemble the parts.
Be careful to keep fingers away from glued areas until completely dry.
This adhesive can instantly bond skin to parts.
To prevent whitening of transparent parts, it is advisable not to use an accelerator.
If you wish to use ZIP KICKER:
- apply a very small amount,
- using a fine brush or toothpick.
It is not necessary to apply the accelerator over the entire bond.
For fiberglass repairs:
- evenly spread POLY-ZAP over the entire surface,
- then let it dry naturally.
For critical applications, it is recommended to test the assemblies to verify their final strength.
| ZAP Reference | Type / Viscosity | Main Characteristics | Compatible Materials | Ideal Uses |
|---|---|---|---|---|
| Green ZAP A-GAP | Thick cyanoacrylate | Excellent gap filling, strong mechanical resistance, comfortable positioning time, quick setting | Balsa, wood, fiberglass, carbon, some plastics, metal | RC structural assemblies, radio-controlled airplanes, RC model repairs, wood/carbon/plastic bonding, motor mounts, canopies |
| Pink ZAP CA | Ultra-thin cyanoacrylate | Very fast penetration, deep infiltration into porous materials, almost instant setting | Balsa, plywood, porous wood, small technical parts | Light RC construction, rib and spar bonding, quick repairs, airplane modeling, precise assemblies |
| POLY-ZAP | Medium viscosity cyanoacrylate | Flexible, transparent after drying, special for modern plastics, good vibration resistance | Lexan, ABS, Delrin, polycarbonate, nylon, fiberglass, painted surfaces | RC car bodies, canopies, ABS cowls, Lexan repairs, ARF parts, RC boats, technical plastic elements |
| Yellow SLO-ZAP | Very thick cyanoacrylate | Very high strength, long positioning time, non-drip, excellent gap filling capacity | Wood, balsa, fiber, carbon, composite fabrics, old woods | Highly stressed assemblies, crack repairs, imperfect joints, structural RC bonding, wood restoration |
| FOAM SAFE ZAP | Special foam cyanoacrylate | Compatible with foams, no material attack, odorless formula, gap filling | Dépron, EPP, EPO, Styrofoam, high-density foams, balsa, plywood | RC foam airplanes, Foamies, Dépron bonding, creative hobbies, foam repairs, solvent-sensitive assemblies |
DANGER. FOLLOW SAFETY PRECAUTIONSWe invite you to consult the Safety Data Sheet (MSDS) by clicking on documentation and technical support and to carefully read the instructions for use and safety rules in French on the product itself before purchase and any use.
- Harmful if swallowed.
- Causes severe eye irritation.
- May irritate respiratory tract.
- May cause cancer.
- Harmful to aquatic life with long lasting effects.
- Cyanoacrylate. Danger.
- Bonds skin and eyes in seconds.
- May cause serious eye damage.
- Keep out of reach of children.
- May cause an allergic skin reaction.
Item sold in multiples of 12 to retailers.
- Glues and coatings
- Cyanoacrylates
- Accessories for models
- Glues
- Product types
- Products for radio -controlled models
Customers who bought this product also bought:
Products you might like
-
Promotion
-
Promotion
-
Promotion
