Accessory for radio Double power supply D-BIC

D-BIC S03878606 Dual Power System Receiver Features

This system is used alone and allows dual power supply to the receiver by two independent batteries (4.8V to 7.4V).

For LiPo batteries greater than 2S, it is imperative to use a U-BEC before this module.

Ideal for securing your radio installation.

Input / output voltage 4 to 10V

Maximum current 6A.

Power source battery type, ubec...

D-BIC PARAMETERS:

• Weight 13 g
• Input connector: 0.5mm2 silicone power cord JR type
• Output connector: 0.5mm2 silicone power cord JR type
• Technology used: VLDOV
• Input voltage: 4 to 10 V
• Battery compatibility: NiCd, NiMH, LiIon, LiPo, and LiFe
• Idle current consumption: None
• Voltage drop in the module: 0.24 V - 1 A, 0.33 V - 3 A, 0.43 V - 6 A
• Continuous output current: 6 A (12 A for 10 s)
• Reverse polarity protection: Yes
• Output short circuit protection: No

Typical Use

• RC gas plane / large models
• Turbine jets
• Models with multiple servos
• Critical installations requiring redundancy

👉 In summary: it is a lightweight, simple receiver power securer, widely used to prevent radio failure during flight.