Gunner Truggy 6S 1/8 - Brushless 4x4 RC Truggy

GUNNER TRUGGY 6S, Ready to drive the ultimate All-Terrain Truggy?

What is RC bashing?

RC bashing involves driving a remote-controlled car focusing on fun, power, and off-road capabilities rather than aiming for the best lap time on a track.

Dirt, grass, bumps, rough terrains, or areas for jumps become the pilot's playground. Unlike track competition, bashing allows for freely enjoying the capabilities of your RC car and exploring various terrains and obstacles.

The Gunner Truggy 6S has been specifically developed for this type of driving. Its 1/8 scale design, brushless motor, 4x4 transmission, and long-travel suspensions combine speed, traction, and control on challenging terrains.

Hobbywing brushless motorization up to 6S

At the heart of the Gunner lies a high-performance Hobbywing electronic system consisting of a 2000 KV brushless motor and a 150 A brushless ESC.

This setup allows adjusting the truggy's power to the pilot's skill level and intended use through different LiPo battery configurations:

• 2 2S LiPo batteries;
• 2 3S LiPo batteries;
• 1 4S LiPo battery;
• 1 6S LiPo battery.

The electronics come equipped with XT90 connectors suitable for the power output.

In 6S configuration, the Gunner truly shines as a high-performance RC truggy.

This significant power is aimed at experienced drivers capable of handling the accelerations and behavior of a 1/8 brushless RC car.

The LiPo charger must be chosen separately based on the batteries used.

4x4 Transmission and Three Reinforced Differentials

The power of a 6S brushless motor requires a transmission capable of efficiently harnessing it.

The Gunner Truggy features a full-time 4-wheel drive transmission paired with three reinforced differentials.

This setup distributes power to all four wheels to achieve excellent traction on low-grip surfaces and rough terrains.

The transmission benefits from:

• hardened steel drive shafts;
• 49-tooth crown gear;
• 12-tooth hardened steel pinion gear;
• 17mm anodized aluminum wheel hexes;
• anodized aluminum Ackermann bar;
• high-strength adjustable turnbuckles.

An anodized aluminum motor mount facilitates access to the transmission for motor pinion changes and maintenance.

Reinforced Chassis for Extreme RC Off-Roading

Power alone is not enough for bashing. An RC car designed for challenging terrains must also withstand the stresses from bumps, changes in grip, and jump landings.

The chassis of the Gunner Truggy 6S features a central red anodized aluminum reinforcement bar and front and rear high-strength composite reinforcements.

The wide front suspension arms combine strength and flexibility to better absorb impacts during off-road use.

The chassis's reinforced nylon composite side guards contribute to body protection, while the front and rear composite bumpers shield the vehicle from impacts during intense RC use.

The chassis also comes equipped with high-quality ball bearings and button-head screws.

Big Bore Shocks for Bumps and Big Jumps

The Gunner's performance also relies on its Big Bore hydraulic shocks.

They feature boots to protect them from dust and maintain performance over time. Three mounting positions are available on the shock towers to adjust settings according to the terrain and desired behavior.

The front and rear shock towers with 5mm are made of red anodized aluminum.

The suspension geometry is fully adjustable, and the Gunner is equipped with front and rear sway bars.

These tuning options allow experienced drivers to adjust the truggy's behavior based on their driving style and the terrain.

An RC Truggy for Off-Roading on Dirt, Grass, and Asphalt

The high-grip rubber tires are designed to provide strong traction on various surfaces.

The Gunner Truggy 6S can navigate through:

• dirt;
• grass;
• asphalt;
• trails and rough terrains;
• areas with bumps and obstacles.

Its truggy format combines a sporty chassis with large all-terrain wheels. It is a particularly versatile solution for drivers who want to alternate between fast driving, off-road, and RC bashing.

MHD3S Remote Control and 15 kg Servo Already Installed

The Gunner comes with its MHD3S 2.4 GHz 3-channel remote control, equipped with its own integrated LiPo battery.

A MHDPRO 15 kg steering servo is also installed on the vehicle.

The compartment for the receiver is protected against dust and splashes, a significant advantage for an RC car intended for regular outdoor use.

A Truggy Body Designed for Sporty Use

The Gunner features a painted and decorated aerodynamic body with roof protections.

At the rear, its "BAT" type wing completes its sporty appearance and contributes to the model's identity.

The red anodized aluminum elements distributed on the chassis, shock absorber mounts, wheel hexes, and central bar also reinforce its high-performance RC car character.

Main Features of the Gunner Truggy 6S

Why Choose the Gunner Truggy 6S for Bashing?

The Gunner Truggy 6S is aimed at hobbyists looking for a powerful 4x4 brushless RC car without sacrificing control and tuning options.

Its main appeal lies in the combination of several sought-after features for bashing: 2000 KV brushless motor, power up to 6S, reinforced all-wheel drive, three differentials, Big Bore shocks, reinforced chassis elements, and adjustable geometry.

It allows for engaging driving on rough terrain, overcoming obstacles, and tackling jumps while maintaining the precise behavior typical of a 1/8 RC truggy.

Truggy or Monster Truck for RC Bashing?

The choice mainly depends on the desired behavior.

A RC truggy like the Gunner Truggy 6S prioritizes a balance between stability, precision, speed, and all-terrain capabilities. Its center of gravity and geometry allow it to maintain a sporty behavior while having large wheels suitable for bashing.

A RC monster truck prioritizes ground clearance, rock crawling, and a behavior suited for "big obstacles."

For drivers seeking this second behavior, the Gunner also comes in a Gunner Monster 6S 1/8 version.

Who is the Gunner Truggy 6S For?

The Gunner Truggy 6S is intended for experienced RC drivers looking for a powerful 1/8 model for all-terrain use and bashing.

It will particularly suit those looking for:

• a 1/8 brushless RC truggy;
• a 4x4 RC car for rough terrain;
• a powerful motor up to 6S;
• an RC car suitable for jumps and bumps;
• a chassis offering numerous tuning options;
• a drivetrain and suspensions designed for intensive use.

With its Hobbywing motorization, 4x4 transmission, and reinforced chassis, the Gunner Truggy 6S 1/8 MHDPRO is designed for those who want to fully exploit the possibilities of RC bashing and off-road driving.