Model of English galleon HMS Revenge 1-85 - OcCre

The history of the HMS Revenge, English galleon of 1577

A warship designed for artillery

The HMS Revenge was built in 1577 at the Deptford shipyards in England, under the direction of Sir John Hawkins.

It belonged to a new generation of English galleons, known as "race-built", whose design differed from that of the traditional large galleons.

Its hull had finer lines, with a specific length-to-width ratio, reduced fore and aft castles, and a relatively low freeboard.

This architecture helped improve the stability of the artillery and the nautical qualities of the vessel.

The history of the HMS Revenge, English galleon of 1577

An English warship with innovative lines

Launched in 1577 at the Deptford shipyards in England, the HMS Revenge introduced the "race-built" galleon type, characterized by lowered fore and aft castles, finer hull lines, and improved stability for the artillery.

This design marked an evolution in the architecture of English warships of the 16th century.

Fifteen hours against an entire fleet in 1591

In 1588, the HMS Revenge was the flagship of Sir Francis Drake during the confrontations against the Spanish Invincible Armada.

Three years later, in 1591, off the island of Flores in the Azores, the English galleon found itself alone against more than fifty Spanish ships.

Under the command of Richard Grenville, the Revenge resisted for fifteen hours of combat.

Refusing to surrender, Grenville preferred to blow up his ship rather than deliver it to the enemy, but his crew opposed this decision.

Eventually captured by the Spanish, the galleon sank in a violent storm while being taken to Spain.

This story makes the HMS Revenge a particularly interesting subject for naval modeling enthusiasts interested in English military marine of the 16th century.

Why build the HMS Revenge OcCre model?

A wooden galleon model with many details

The OcCre HMS Revenge model combines various materials to reproduce different parts of the ship.

The wooden elements make up the structure and coverings, while the metal pieces recreate the details of the galleon's equipment.

The sails and cotton threads of various thicknesses complete the rigging reproduction.

The diversity of components allows for working on several naval modeling techniques within the same project.

A model suitable for enthusiasts of historical ships

This ancient wooden ship model is aimed at builders wishing to replicate a Renaissance English war galleon.

Its architecture, artillery, and sails offer different elements to highlight during assembly.

Once completed, it can be displayed alone or integrated into an exhibition scene dedicated to the English marine of the 16th century.

However, its dimensions should be considered before planning a location or diorama.

Technical specifications of the HMS Revenge 1-85 model

Scale, dimensions, and OcCre reference

Brand: OcCreModel: HMS RevengeManufacturer reference: 13004Type: English galleon, historical warshipYear of the original ship: 1577Scale: 1-85Number of pieces: 3,076Length of the finished model: 695 mm (69.5 cm)Height of the finished model: 570 mm (57 cm)Width of the finished model: 300 mm (30 cm)Difficulty level: intermediate (level 2 out of 4)Estimated assembly time: 560 hours

With nearly 70 cm in length and 57 cm in height, the HMS Revenge is a wooden sailboat model that requires a suitable workspace during construction and sufficient display space once completed.

What materials are included in the HMS Revenge kit?

The OcCre construction kit uses several materials selected according to the elements to be reproduced:

Wood: various types intended for the structure, coverings, and visible finishes. Laser-cut planks facilitate the identification and adjustment of elements.

Photo-etched brass: engraved metal parts for fine details of the ship.

Die-cast Zamak: detailed elements and small metal accessories.

Cotton: sails, threads of various thicknesses, and textile elements necessary for rigging and associated details reproduction.

The wooden components are FSC Mix Credit certified by the manufacturer.

What skill level is required to assemble the HMS Revenge OcCre?

An intermediate boat model for modelers with some experience

OcCre classifies the HMS Revenge as level 2 out of 4, corresponding to an intermediate difficulty.

This level is suitable for modelers who already have some experience with assembly and are capable of working on a model with numerous parts.

With its 3,076 components, this wooden warship model requires methodical organization of the different construction stages.

Working on the hull, detail parts, and rigging requires special attention to adjustments and assembly order.

Therefore, the HMS Revenge is more suitable for a modeler looking to undertake a long-term project rather than someone seeking a simple and quick first model to finish.

How long does it take to build the HMS Revenge?

The manufacturer estimates approximately 560 hours of assembly time.

This duration is indicative and may vary depending on the builder's experience, work pace, and attention to finishing details.

To better organize the project, it is advisable to divide the construction into several phases, following the instructions provided by OcCre.

This approach allows for gradual control of the assembly before moving on to the next steps.

How to prepare for assembling the HMS Revenge model?

OcCre assembly instructions and manual

OcCre provides downloadable assembly instructions for reference 13004.

These documents allow you to review the different construction stages and prepare for working on the galley elements.

Before starting, it is recommended to go through the instructions, identify the parts, and organize the components according to their material and function. This preparation is particularly useful for a kit with over 3,000 pieces.

What tools, glues, and paints to prepare?

Building a wooden ship model requires tools suitable for handling, adjusting, and assembling components.

For the HMS Revenge, the work involves laser-cut wooden parts, photo-etched brass elements, zamak accessories, and textile components.

Prior to assembly, consult the OcCre instructions to determine the necessary tools, glues, paints, and finishing products.

The manufacturer's sheet does not specify their presence in the kit, so it is advisable to check the available supplies before starting the construction.

Paints and finishes can be considered based on the desired appearance for the hull, metal elements, and ship details, following the manufacturer's assembly instructions.

Consider additional accessories!

The tools, accessories, and products needed for assembling and finishing the model are not included.

We have selected the main items useful for its construction.

For simplicity and cost-effectiveness, order them at the same time as your model:

In metropolitan France, shipping is free for orders over €150.

Simply check the boxes above for the items you wish to add to your order.

How to display the assembled HMS Revenge model?

An English galleon model for a naval collection

The HMS Revenge can join a collection of English ship models, historical galleons, or military sail vessels.

Its 1/85 scale and dimensions allow for a presentation highlighting the silhouette of the ship, its castles, and rigging.

For a historical diorama project, the model can serve as the centerpiece of a scene inspired by the English navy of the late 16th century. The presentation should consider its length of 69.5 cm, width of 30 cm, and height of 57 cm.

The manufacturer does not specify the presence of a display base in the kit.

This aspect should be checked before preparing the final presentation.

Frequently Asked Questions about the OcCre HMS Revenge model

Is the OcCre HMS Revenge suitable for beginners?

The OcCre HMS Revenge is classified as intermediate level.

It is intended for modelers with some construction experience, especially in managing the assembly of a large number of parts and detailed work.

What are the dimensions of the completed HMS Revenge model?

At a 1-85 scale, the model measures 69.5 cm in length, 57 cm in height, and 30 cm in width.

These measurements correspond to the assembled model.

Are the sails included in the model?

Yes. OcCre indicates the presence of cotton for the sails, as well as threads of different thicknesses for rigging and textile elements of the ship.

How many pieces are included in the HMS Revenge kit?

The OcCre reference 13004 includes 3,076 pieces.

The manufacturer estimates a construction time of 560 hours for this English galleon model.

Can the assembly manual for the HMS Revenge be downloaded?

Yes. OcCre offers downloadable construction instructions for this model.

They can be reviewed before starting to prepare for the assembly steps.

Is the HMS Revenge a remote-controlled boat?

The OcCre HMS Revenge is presented as a wooden boat model to be built, intended for static naval modeling.

The manufacturer's sheet does not mention any remote control equipment or motorization.

Can replacement parts be obtained for the HMS Revenge?

OcCre offers a lifetime warranty on the parts of its kits, with a replacement system for damaged or lost items during assembly. The terms of coverage should be verified directly with the manufacturer.