RC Car Gunner Truggy 6S 1/8 - Brushless 4x4 RTR RC Truggy

GUNNER TRUGGY 6S, Ready to drive the ultimate all-terrain Truggy?

What is RC bashing?

RC bashing involves driving a remote-controlled car focusing on enjoyment, power, and off-road capabilities rather than aiming for the best lap time on a track.

Dirt, grass, bumps, rough terrains, or areas for jumps become the pilot's playground. Unlike track competition, bashing allows you to freely enjoy your RC car's capabilities and explore different terrains and obstacles.

The Gunner Truggy 6S has been specifically developed for this type of driving. Its 1/8 scale design, brushless motor, 4x4 transmission, and long-travel suspensions combine speed, traction, and control on challenging terrains.

A Hobbywing brushless motor system up to 6S

At the heart of the Gunner is a high-performance Hobbywing electronic system consisting of a 2000 KV brushless motor and a 150 A brushless ESC.

This setup allows you to adjust the truggy's power according to your driving level and intended use with different LiPo battery configurations:

• 2 2S LiPo batteries;
• 2 3S LiPo batteries;
• 1 4S LiPo battery;
• 1 6S LiPo battery.

The electronics come equipped with XT90 connectors suitable for the power output.

In 6S configuration, the Gunner truly shows its high-performance RC truggy character.

This significant power is aimed at experienced drivers capable of handling the accelerations and behavior of a 1/8 brushless RC car.

The LiPo charger must be chosen separately based on the batteries used.

4x4 Transmission and Three Reinforced Differentials

A brushless 6S motor's power requires a transmission capable of efficiently harnessing it.

The Gunner Truggy features a 4-wheel drive system with three reinforced differentials.

This setup distributes power to all four wheels to achieve excellent traction on low-grip surfaces and rough terrains.

The transmission includes:

• Hardened steel drive shafts;
• 49-tooth transmission ring gear;
• 12-tooth hardened steel motor pinion;
• 17mm anodized aluminum wheel hexes;
• Anodized aluminum Ackermann bar;
• High-strength adjustable tie rods.

An anodized aluminum motor mount support also facilitates access to the transmission and motor pinion removal and replacement.

Reinforced Chassis for Extreme RC Off-Roading

Power alone is not enough for bashing. An RC car designed for challenging terrains must also withstand the stresses from bumps, changes in grip, and jump landings.

The chassis of the Gunner Truggy 6S features a red anodized aluminum central reinforcement bar and high-strength composite front and rear reinforcements.

The wide front suspension arms combine strength and flexibility to better absorb stresses during off-road use.

The chassis's reinforced nylon composite side guards help protect the body, while the front and rear composite bumpers shield the vehicle from impacts during intense RC use.

The chassis is also equipped with high-quality ball bearings and button head screws.

The Gunner 1/8 6S is also available in Monster version and kit version.

Big Bore Shocks for Bumps and Big Jumps

The Gunner's performance also relies on its Big Bore hydraulic shocks.

They feature boots to protect them from dust and maintain their performance over time. Three mounting positions are available on the shock towers to adjust settings to the terrain and desired behavior.

The front and rear shock towers with 5mm are made of red anodized aluminum.

The suspension geometry is fully adjustable, and the Gunner is equipped with front and rear sway bars.

These adjustment options allow experienced drivers to fine-tune the truggy's behavior according to their driving style and the terrain.

An RC Truggy for Driving on Dirt, Grass, and Asphalt

The high-grip rubber tires are designed to provide strong traction on various surfaces.

The Gunner Truggy 6S can navigate:

• dirt;
• grass;
• asphalt;
• paths and rough terrains;
• areas with bumps and obstacles.

Its truggy format combines a sporty chassis with large all-terrain wheels. It thus constitutes a particularly versatile solution for pilots who wish to alternate between fast driving, off-road, and RC bashing.

Which remote control to choose?

The Gunner comes with its MHD3S 2.4 GHz 3-channel remote control, equipped with its own integrated LiPo battery.

A 15 kg MHDPRO steering servo is also installed on the vehicle.

The compartment of the receiver is protected against dust and splashes, a significant advantage for an RC car intended to be regularly used outdoors.

Prefer to assemble your car and choose your own electronics?

Discover the Gunner Truggy 6S 1/8 kit.

A truggy body designed for sporty use

The Gunner receives a painted aerodynamic body decorated with roof protections.

At the rear, its "BAT" type spoiler completes its sporty appearance and contributes to the model's identity.

The red anodized aluminum elements distributed on the chassis, shock absorber mounts, wheel hexes, and central bar also reinforce its high-performance RC car character.

Main features of the Gunner Truggy 6S

Why choose the Gunner Truggy 6S for bashing?

The Gunner Truggy 6S is aimed at hobbyists looking for a powerful 4x4 brushless RC car without sacrificing control and tuning possibilities.

Its main interest lies in the combination of several sought-after features for bashing: 2000 KV brushless motor, power supply up to 6S, reinforced all-wheel drive, three differentials, Big Bore shocks, reinforced chassis elements, and adjustable geometry.

It allows for engaging driving on rough terrain, overcoming obstacles, and tackling jumps while maintaining the precise behavior typical of a 1/8 RC truggy.

Truggy or Monster Truck for RC bashing?

The choice mainly depends on the desired behavior.

An RC truggy like the Gunner Truggy 6S prioritizes a compromise between stability, precision, speed, and off-road capabilities.

Its center of gravity and geometry allow it to maintain a sporty behavior while having large wheels suitable for bashing.

An RC monster truck prioritizes ground clearance, obstacle clearance, and a behavior geared towards "big obstacles."

For pilots seeking this second behavior, the Gunner also exists in a Gunner Monster 6S 1/8 version.

If you are undecided between sporty behavior and obstacle clearance, compare the Gunner Truggy 6S to the Gunner Monster 6S.

Monster RTR

Monster kit

Who is the Gunner Truggy 6S for?

The Gunner Truggy 6S is intended for experienced RC drivers looking for a powerful 1/8 model for all-terrain use and bashing.

It will be particularly suitable for those looking for:

• a 1/8 brushless RC truggy;
• a 4x4 RC car for rough terrain;
• a powerful motorization up to 6S;
• an RC car suitable for bumps and jumps;
• a chassis offering many tuning possibilities;
• a transmission and suspensions designed for intensive use.

With its Hobbywing motorization, 4x4 transmission, and reinforced chassis, the Gunner Truggy 6S 1/8 MHDPRO is tailored for those who want to fully exploit the possibilities of RC bashing and all-terrain driving.