-
News to come
RC Electric Airplane Curare 1m ARF 30E - SEAGULL SEA 431
RC Plane Curare F3A Electric 1.09 m - SEAGULL MODEL
The SEAGULL MODEL Curare 43in ARF 30E is a radio-controlled F3A aerobatic plane with a wingspan of 1,092 mm.
Its balsa and plywood structure, symmetrical profiles, and 30E brushless motor are designed for precise piloting with a 3S or 4S LiPo battery.
RC Electric Airplane Curare 1m ARF 30E - SEAGULL SEA 431
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
An F3A Remote-Controlled Airplane Inspired by the Famous Curare
Are you looking for an electric RC airplane to practice precision aerobatics?
The Curare 43in ARF 30E from SEAGULL MODEL captures the spirit of the famous competition airplane designed by Hanno Prettner, in a compact version specially developed around a 30E electric motor.
It is not simply a scaled-down version of a larger model: the geometry and structure have been studied to maintain consistent and predictable behavior.
With its 1,092 mm wingspan, 989 mm length, and flight-ready weight of about 1.6 kg, this F3A RC airplane is suitable for modelers looking for a transportable model for classic aerobatics and sport flying.
Its symmetrical profiles favor precise trajectories, inverted flight maneuvers, and figures like axial rolls.
The Curare prioritizes harmonious controls and consistent flight rather than extreme 3D aerobatics.
A Laser-Cut Balsa and Plywood Structure
A Lightweight Airframe Designed for Precision
SEAGULL MODEL uses quality laser-cut balsa and plywood to construct the structure of this remote-controlled aerobatic airplane.
This traditional wood construction results in a lightweight and rigid airframe.
It contributes to the desired F3A behavior: a sharp response to controls, precise trajectory tracking, and good neutrality in inverted flight.
The wing and horizontal stabilizer feature fully symmetrical profiles.
This geometry is particularly suited for aerobatic figures requiring maneuvers in both flight directions.
The wing disassembles into two parts, and the horizontal stabilizer also consists of two detachable elements.
These solutions facilitate the transport and storage of the model without requiring a bulky airframe.
Practical Equipment for Assembly and Use
The large removable cabin hatch provides direct access to the battery and onboard electronic equipment.
The fiberglass engine cowl is factory-painted.
The airplane also features factory-applied heat-shrink covering, designed to offer a neat finish and good visibility in flight.
The fixed main landing gear is made of piano wire.
The polyurethane wheels, equipped with molded plastic hubs, are intended for hard surfaces and well-maintained grass fields.
SEAGULL provides the necessary hardware for assembly as well as a UV DTF decoration sheet.
These elements are applied by simple peeling and application, without soaking in water.
Brushless 30E Motorization and 3S or 4S LiPo Battery
The Curare 43in ARF 30E is designed for electric propulsion. SEAGULL recommends a 30E class brushless outrunner motor, paired with a 50 to 60 A ESC with Switching BEC.
This system allows powering the propulsion and radio equipment from an electrical setup suited to the airplane's format.
The manufacturer recommends two battery configurations: a 3S LiPo of 2,200 to 2,600 mAh or a 4S LiPo of 1,800 to 2,200 mAh.
The choice will depend on the installed motor and the chosen propulsion configuration.
For the propeller, SEAGULL indicates a size between 10 × 5 and 11 × 7.
It is important to follow the motor manufacturer's recommendations and check the compatibility of the propeller with the ESC.
This electric design avoids the installation of a thermal engine, a tank, and its fuel system.
The model is therefore intended for exclusively electric use in this 30E configuration: no thermal displacement is to be expected.
6-Channel Radio Control and Four Mini Servos
To pilot the Curare, SEAGULL recommends a 6-channel programmable radio control and four mini servos.
The servos control the ailerons, elevator, and rudder, while one channel is dedicated to managing the electric motor.
The programmable radio allows configuring control functions and settings suited for precision piloting.
The manufacturer does not specify a minimum torque or particular reference for the servos.
It is therefore necessary to select four mini servos compatible with the intended locations and control surface loads.
Also check the electrical compatibility of the servos and the receiver with the chosen ESC's BEC.
Technical Specifications of SEAGULL Curare 43in ARF 30E
| Feature | Value |
|---|---|
| Brand | SEAGULL MODEL |
| Model | Curare 43in ARF 30E |
| Reference | SEA431 |
| Type | Electric RC aerobatic plane F3A |
| Wingspan | 1,092 mm |
| Length | 989 mm |
| Wing area | 23 dm² |
| Flight weight | Approximately 1,600 g |
| Construction | Laser-cut balsa and plywood |
| Profiles | Symmetrical wing and tail |
| Wing | Detachable in two parts |
| Horizontal stabilizer | Detachable in two parts |
| Landing gear | Fixed, wire |
| Recommended motor | Brushless outrunner 30E |
| Recommended ESC | 50 to 60 A with Switching BEC |
| Recommended battery | LiPo 3S 2,200 to 2,600 mAh or 4S 1,800 to 2,200 mAh |
| Electric propeller | 10 × 5 to 11 × 7 |
| Radio control | 6-channel programmable |
| Servos | 4 mini-servos |
Hanno Prettner and the History of the Curare
The Curare is associated with Austrian pilot and designer Hanno Prettner, world champion in radio-controlled aerobatics and a prominent figure in the F3A discipline.
His plane became a reference for classic precision aerobatics, notably for its trajectory qualities and flight behavior.
With this 43-inch version, SEAGULL MODEL retains the identity of this historic model while developing a frame adapted to current electric equipment.
The Curare 43in ARF 30E is thus aimed at enthusiasts of classic aerobatics who wish to rediscover the spirit of F3A in a compact radio-controlled plane, built in wood and powered by a modern brushless setup.
- Degree of finish
- Pre-assembled (RTF)
- Engines
- Brushless engine
- Level of use/difficulty
- Intermediate
- Product types
- Radiocomed aircraft
Sport - States
- News to come