-
News to come
To ride, fly, sail, everything is there at MHD!
The SEAGULL MODEL Kwik Fli Classic SEA432 is a 1.22 m wingspan electric Pattern aerobatic RC plane.
Its carbon-reinforced balsa and plywood structure houses a 30E brushless motor, a 3S to 4S LiPo battery, and five mini servos to perform classic aerobatic maneuvers with precision.
RC Electric Plane KWIK FLI 1.2m ARF 30E - SEAGULL SEA 432
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Are you looking for an electric RC aerobatic plane to practice Pattern flying?
The Kwik Fli Classic 48" from SEAGULL MODEL retains the lines and flight behavior of the famous Kwik Fli Mk III designed by Phil Kraft.
This 1,220 mm ARF version prioritizes smooth trajectories, precise controls, and classic figure sequences over extreme 3D aerobatics.
With its announced weight of 1.6 kg and wing area of 23.86 dm², this radio-controlled airplane is aimed at modelers who appreciate precise piloting and smooth maneuvers.
Its 30E electric motorization allows for a compact installation, without a fuel tank or thermal power supply circuit.
The kit is delivered to be assembled and equipped with suitable radio and propulsion elements.
The Kwik Fli Classic SEA432 features a laser-cut balsa and plywood structure.
Carbon fiber reinforcements improve the rigidity of the fuselage while limiting its weight. The carbon wing tube ensures the maintenance and alignment of the two wing halves during assembly.
This design helps preserve the geometric precision necessary for aerobatic figures.
The wing and tailplane use fully symmetrical profiles.
They promote neutral control behavior and smooth trajectories, including inverted flight.
The large control surfaces allow precise control of the airplane during loops, axial rolls, stall turns, and Cuban eights.
The two-part detachable wing is attached to the fuselage by a plug-in system.
This configuration facilitates the transport of the airplane and its storage between flight sessions. The large removable cabin hatch provides access to the propulsion battery and electronic equipment.
The factory-painted fiberglass engine cowl facilitates the installation and access to the brushless motor.
The fixed landing gear is equipped with lightweight foam wheels.
It is designed for use on hard runways or well-maintained grass fields. SEAGULL MODEL also provides a UV DTF decoration sheet: the stickers are applied by peeling and application, without prior soaking in water.
A complete hardware set complements the kit for its assembly.
The SEAGULL Kwik Fli Classic 48" is exclusively presented in this version as an electric radio-controlled airplane.
The manufacturer recommends a 30E class brushless outrunner motor.
This motorization is to be paired with a 50 to 65 A ESC equipped with a Switching BEC, suitable for powering the servos and the receiver.
For power, plan for a 3S to 4S LiPo battery, with a capacity between 1,800 and 2,600 mAh.
The choice of voltage and propeller must be compatible with the motor and the limits of the ESC. SEAGULL recommends an electric propeller between 11 × 6 and 13 × 6.
Check the recommendations of your motorization manufacturer before selecting all components.
The electric propulsion simplifies the model's preparation and routine maintenance.
The large upper hatch allows for battery replacement and access to onboard equipment without disassembling the fuselage.
The model is thus suitable for modelers who wish to practice classic aerobatics with electric motorization.
To equip the Kwik Fli Classic SEA432, SEAGULL indicates a 5-channel radio control and five mini-servos.
The receiver must be compatible with your transmitter and have the necessary outputs for the airplane's controls.
The servos ensure the actuation of the control surfaces and the model's control system.
The manufacturer does not specify a minimum torque or particular reference for the servos. It is therefore preferable to choose five mini-servos suitable for the dimensions of the housings and the efforts of the control surfaces, without imposing a non-indicated technical value.
Also, check the compatibility of the ESC's BEC with the voltage and consumption of the radio system.
| Feature | Value |
|---|---|
| Brand | SEAGULL MODEL |
| Model | Kwik Fli Classic 48" ARF 30E |
| Reference | SEA432 |
| Type | Electric RC Pattern Aerobatic Plane |
| Wingspan | 1,220 mm |
| Length | 1,096 mm |
| Wing Area | 23.86 dm² |
| Flight Weight | Approximately 1,600 g |
| Construction | Laser-cut balsa and plywood |
| Reinforcements | Carbon fiber tubes |
| Wing and Tail Profile | Symmetrical |
| Wing | Detachable in two parts |
| Landing Gear | Fixed with foam wheels |
| Recommended Motor | Brushless outrunner class 30E |
| Recommended ESC | 50 to 65 A with Switching BEC |
| Recommended Battery | LiPo 3S to 4S, 1,800 to 2,600 mAh |
| Electric Propeller | 11 × 6 to 13 × 6 |
| Radio Control | 5 channels |
| Servos | 5 mini-servos |
The Kwik Fli is associated with Phil Kraft, a renowned American designer in the history of radio-controlled aerobatics.
The third generation, the Kwik Fli Mk III, became a benchmark for classic Pattern flying.
It notably won the FAI World Championship of radio-controlled aerobatics in 1967.
This historic model was designed to prioritize control harmony, precision, and smoothness of maneuvers.
With the Kwik Fli Classic 48" SEA432, SEAGULL MODEL revives this spirit in a 1.22 m electric format, featuring laser-cut wood construction and carbon reinforcements.
A version intended for classic aerobatics enthusiasts who wish to rediscover the piloting qualities of Pattern with modern electric propulsion.