-
News to come
To ride, fly, sail, everything is there at MHD!
The SEAGULL MODEL Super Stik SEA430 is a 3D aerobatic radio-controlled plane with a wingspan of 1,220 mm, constructed from balsa and carbon-reinforced plywood.
Weighing approximately 1.4 kg ready to fly, it is equipped with a 30E brushless motor and a 4S LiPo battery from 1,800 to 2,600 mAh.
RC Electric Plane Super Stick 1.2m ARF 30E - SEAGULL SEA 430
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Fast shipping
Via Chronopost 24H
Via DPD 24/48H
Colissimo 48/72H
340914 products in stock
Real-time stock displayed
Secure payment
Secure payment
In 3 or 4 installments

4.6/5
Specialist since 1955
Are you looking for an electric RC airplane capable of performing 3D aerobatic maneuvers while maintaining predictable behavior at low speeds? The SEAGULL MODEL Super Stik 48in ARF 30E meets this use with a lightweight wooden airframe and large control surfaces. Its 1.22 m wingspan format makes it easy to transport and allows for spontaneous flying sessions on a suitable field.
Unlike a foam remote-controlled airplane, the Super Stik has a traditional balsa and plywood structure.
This design provides precise response to controls and better trajectory maintenance.
SEAGULL MODEL has nevertheless worked on the lightness of the airframe to maintain forgiving maneuverability, especially during low-speed evolutions.
The Super Stik SEA430 benefits from laser-cut balsa and plywood construction.
Its structure is reinforced with carbon fiber tubes and fiberglass laminated plates at the main junctions.
These reinforcements improve torsional rigidity and mechanical strength without excessively penalizing the weight of the airplane.
The carbon wing joiner tube ensures their positioning and retention.
The airframe receives a heat-shrinkable covering offering a durable finish and good visibility in flight.
The large removable canopy quickly provides access to the battery and electronic equipment.
The adjustable battery mount, equipped with a hook-and-loop fastener, facilitates its positioning to adjust the airplane's balance.
The Super Stik is designed for classic aerobatics and 3D maneuvers.
Its large control surfaces provide significant authority to the controls, essential for performing low-speed evolutions and acrobatic figures requiring precise corrections.
The pilot can notably work on hovering, Harrier, Torque Roll, and Waterfall.
The model is also suitable for sport aerobatics and more classic evolutions.
SEAGULL MODEL prioritizes maneuverability, precision, and confidence at low speeds rather than seeking maximum speed or excessive power.
Its behavior is announced as forgiving, with a piloting sensation close to that of a foam airplane, while maintaining the precision of a rigid wooden structure.
The SEA430 is nevertheless aimed at modelers who already have experience in remote-controlled piloting, particularly to exploit its 3D capabilities.
The SEAGULL Super Stik 48in is designed around a 30E class brushless electric motorization.
The manufacturer recommends an outrunner motor paired with a 50 to 65 A electronic controller.
This configuration is intended to work with a 4S LiPo battery with a capacity between 1,800 and 2,600 mAh.
For the propeller, SEAGULL recommends a diameter and pitch between 12 x 6E and 13 x 6E.
These indications allow for selecting equipment suitable for the airframe, respecting the characteristics of the chosen motor and controller.
The 30E class here refers to the recommended motorization format and not a power expressed in watts.
The battery compartment is easily accessible thanks to the large removable canopy.
The adjustable mount allows the battery to be moved to facilitate the center of gravity adjustment.
This arrangement is particularly convenient for modelers who wish to adapt their electrical setup or quickly replace their battery between flights.
The radio installation requires a programmable 4-channel remote control, a receiver compatible, and four 16 g class miniature servos. This configuration ensures control of the ailerons, elevator, rudder, and motor.
The large control surfaces require a reliable and properly adjusted installation to fully enjoy the model's acrobatic capabilities.
A programmable remote control allows adjusting the servo travel, exponentials, and throws according to the pilot's habits.
It is thus possible to start with reactions adapted to one's level, then gradually increase the control authority to work on 3D figures.
With its 1,220 mm wingspan and announced flight-ready weight of 1.4 kg, the Super Stik easily fits in most cars.
Its lightweight 2-inch foam wheels allow use on hard surfaces or well-maintained grass fields.
The kit is offered in ARF (Almost Ready To Fly) version.
The airframe is largely prepared but requires the installation of the motorization, controller, battery, four servos, and radio equipment.
The necessary screws and accessories for assembly are provided.
A UV-DTF decoration board is also included: its brightly colored patterns are simply applied by peeling and placing, without prior soaking.
| Features | Specifications |
|---|---|
| Manufacturer | SEAGULL MODEL |
| Reference | SEA430 |
| Model | Super Stik 48in ARF 30E |
| Type | 3D aerobatic radio-controlled plane |
| Wingspan | 1,220 mm |
| Length | 1,073 mm |
| Wing area | 34 dm² |
| Flight weight | Approximately 1.4 kg |
| Construction | Laser-cut balsa and plywood |
| Structural reinforcements | Carbon tubes and fiberglass plates |
| Motorization | Brushless outrunner 30E |
| Controller | Brushless 50 to 65 A |
| Battery | LiPo 4S from 1,800 to 2,600 mAh |
| Recommended propeller | 12 x 6E to 13 x 6E |
| Radio control | Programmable 4 channels minimum |
| Required servos | 4 miniature servos of 16 g class |
| Wheels | Foam, 2-inch diameter |
| Version | ARF – assembly and equipment to be installed |
The Super Stik embodies the philosophy of Stick-type planes, recognizable by their simple silhouette, high wing, and design prioritizing maneuverability.
This family of planes is appreciated in aeromodeling for its versatility and flight qualities.
With this 48-inch version, SEAGULL MODEL adapts this spirit to modern electric 3D aerobatics, combining a traditional wooden structure with composite material reinforcements.
The Super Stik SEA430 is thus aimed at modelers looking for a compact and transportable electric balsa radio-controlled plane, capable of alternating between sports aerobatics, slow maneuvers, and 3D figures.
It offers an alternative to foam models for those who prioritize piloting precision and traditional construction.