RC LASER 1.2m ARF 30E orange and white SEAGULL Models

A structure designed for 3D

A lightweight and resistant cell

The LASER 30E Seagull Models benefits from a traditional construction combining balsa and plywood. This design allows for a sufficiently rigid cell while maintaining a contained mass.

Carbon fiber reinforcements contribute to the rigidity of different areas of the structure.

This design is particularly suitable for the stresses generated by aerobatics and 3D maneuvers.

With a wing area of 31 dm² for a mass of approximately 1.7 kg, the model maintains an interesting size-to-weight ratio for a RC aerobatic airplane.

Controls adapted for aerobatic flying

The LASER is designed to provide quick and precise responses to controls. This feature is essential when it comes to performing aerobatic maneuvers, working on attitude changes, or maintaining control of the model in unusual positions.

The model has the three classic control axes: ailerons, elevator, and rudder, in addition to throttle control.

SEAGULL clearly identifies the SEA417 as an aerobatic airplane with these control functions.

This design makes the Seagull LASER 48" particularly suitable for modelers looking for an electric 3D RC airplane capable of offering agile and precise flying.

A versatile 48-inch format

With its 1.22 m wingspan, the LASER belongs to a very interesting category for RC modeling.

It is compact enough to facilitate transport and pre-flight preparation, while maintaining dimensions that allow full enjoyment of aerobatics.

The 48-inch format is also used by Seagull Models to designate this model, also presented under the name Laser 48" ARF 30E.

An RC airplane for experienced pilots

The LASER 30E is not a beginner's training airplane for those new to RC flying.

Its responsive behavior and aerobatic nature already require a good mastery of RC airplane flying.

Information available on the SEA417 classifies it in the category of models intended for intermediate to advanced pilots, or even experienced pilots according to distributors.

I therefore recommend this Seagull Models LASER to a modeler who already masters the controls of a three-axis airplane and who wants a more dynamic model for practicing RC aerobatics, aerobatic flying, and 3D maneuvers.

Its size is also suitable for progression: it allows for a large enough airplane to be clearly visible in flight, without reaching the dimensions and transport constraints of a large-scale aerobatic model.

Key features of the Seagull Models LASER 30E

The Seagull Models LASER 30E ARF orange and white, reference SEA417, has the following characteristics:

The power system and recommended accessories

To equip this LASER 30E Seagull Models, Scientific-MHD recommends an electric brushless 400 W / 800 Kv power system.

The recommended references are:

• • Motor DM2825 Kv950 - S03872826
  • Controller BF 70A - S03878070
    • 4 micro or mini servos - S04383442
    • Propeller 13 x 6
    • LiPo 4S 2200 mAh Battery - Z03L9220340
    • LiPo 4S 2500 mAh Battery - Z03L9250340
    • Charger
    • Minimum 4-channel Radio

This configuration allows for a coherent set around an electric RC airplane Seagull Models of 1.22 m, with a LiPo 4S power supply adapted to the desired flight program.

A Seagull Models RC airplane for aerobatics and 3D

With its lightweight design, a 48-inch wingspan, 1.22 m wingspan, and acrobatic vocation, the LASER 30E is aimed at hobbyists who want more than just a leisure airplane.

The Seagull Models LASER 48" ARF 30E combines the desired features of a RC aerobatic airplane: a lightweight fuselage, reinforced structure, good responsiveness, and an electric power system suitable for dynamic use.

Therefore, it is a particularly interesting model for those looking for an electric 3D RC airplane, an aerobatic RC airplane, a Seagull Models RC airplane, or even a balsa and plywood ARF RC airplane for pilots wanting to practice aerobatics with an intermediate-sized model.

SEA417, LASER 30E, LASER 48" ARF: three designations that refer to the same orange and white Seagull Models airplane, designed to offer dynamic flying in a practical 1.22 m format.