Support RC airplane Robart 401 Super Stand adjustable

An adjustable support for different RC models

The Robart 401 consists of a rectangular foam base and two vertical foam supports.

The foam ends ensure contact with the model while limiting the risk of marking the cell.

The supports can be positioned to accommodate different aircraft dimensions.

Flexible elements also help to better fit the model's shape and distribute the contact points.

According to available data, the support has a height of approximately 11 inches (279 mm), while its length can be adjusted from 0 to 30 inches (approximately 762 mm). Its width is about 11 inches (279 mm).

RC airplane support for construction and maintenance

The Robart Super Stand 401 is used in many modeling operations. It allows the airplane to be held during the installation of electronics, servo connections, engine mounting, or landing gear interventions.

It is also practical for construction and finishing work. The model can remain on the support during certain sanding, painting, or adjustment operations, with the contact areas protected by the foam elements.

The integrated trays provide another advantage during field or workshop interventions. They keep small parts, screws, and tools needed for work nearby.

A practical support for the field and workshop

The Robart 401 is designed as a versatile accessory for RC airplane modeling.

Its detachable design facilitates storage and transport, while its foam structure minimizes the risk of damaging the model's finish.

It is suitable for both preparing an airplane before a flight and for work done in the workshop.

For a modeler looking for an adjustable support for RC airplanes, the Super Stand provides a stable and convenient platform without immobilizing the airplane directly on a work surface. The support comes with a rectangular base and two foam supports and requires assembly.

Features of the Robart 401 Super Stand

Universal support for RC airplanes Reference Robart 401

Designation: Super Stand Support suitable for construction, maintenance, and painting

Usable in the workshop and in the field

Integrated trays for tools and small parts

Foam supports to protect the model Rectangular foam base

Two vertical foam supports

Height: approximately 279 mm

Adjustable length: up to approximately 762 mm

Width: approximately 279 mm

Suitable for different model sizes

Compatible with the use of the Robart Model Incidence Meter Assembly required

Suitable for RC airplanes and other models that can be properly supported by the stand