RC car
Z630008A4S
Electric remote-controlled car Buggy GUNNER 4S Combo 4S 1:8
Electric remote-controlled car with Brushless motor at 1/8 scale.
The latest addition to the GUNNER range from the MHDPRO brand, this 4S Buggy will satisfy you with its ultra-modern design and HOBBYWING electronic equipment.
High-end equipment, top speed 75km/h.
Available with a Blue White Red decoration in Combo 4S at the accessory level under this reference.
2.15.1.0
€499.95
VAT included
Electric remote-controlled car Buggy GUNNER 4S Combo 4S 1:8
Plus de detailsElectric remote-controlled car Buggy GUNNER 4S Combo 4S 1:8
€499.95
Shipping within 48 hours 
335217 products in stock 
Customer service 
After the successful launch of the new GUNNER 6S in Truggy and Monster Truck, it was obvious that the MHDPRO brand had to offer a Buggy based on this new chassis.It is done with this new Buggy GUNNER whose design has nothing to do with its predecessor.This new electric remote-controlled car at 1/8 scale is delivered ready to run (RTR), fully equipped with its 200KV Brushless motor, its HOBBYWING 100A Brushless ESC, its new "Front Cab" body with "waves" on the sides for better stability at high speed.The major changes compared to its predecessor are the presence of new ball joint hubs with CVD drive shafts on the front axle, large volume shocks, numerous red anodized aluminum parts, and its T6 aluminum chassis.This new electric remote-controlled Buggy is offered under this reference with a MAXCELL 60C 4-cell 6750mAh LiPo battery and the Z032059 ULTIMATE PRO 4 charger.
Technical specifications of the electric remote-controlled vehicle:
- 4-wheel drive Brushless Buggy
- Ready-to-run - 1/8 Scale
- Length: 510mm
- Width: 310mm
- Height: 190mm
- Wheelbase: 325mm
- Wheel diameter: 120mm
- Weight: 3450g
- HOBBYWING 2000kV Brushless Motor
- Hobbywing 100A ESC
- Chassis: 3mm T6 Aluminum
- New ball joint hubs
- CVD drive shafts at the front
- 15kg/cm steering servo
- Anodized Aluminum servo horn
- Waterproof receiver box
- 4 large volume aluminum shocks
- Many anodized aluminum parts
- 3mm T6 alloy chassis
- New aerodynamic body with "waves"
- Front and rear anti-roll bars
- 4-channel 2.4GHz MHD4c radio
Powertrain equipment:
MAXCELL Z03L503S6750HC 60C 6750mAh LiPo 4S battery with XT-90 connector.
High-capacity Lithium Polymer battery that will allow you to fully exploit the power of this car.
Approximately 15 to 25 minutes of runtime depending on driving.ULTIMATE PRO 4 Z032059 3/4 Cell LiPo charger.
Automatic charger for charging Li-Po batteries, with a charging current of 4 amperes.
The GUNNER 4S Buggy combines ultra-modern design with cutting-edge electronics designed by Hobbywing, ensuring maximum reliability and performance for total satisfaction.User-friendly for beginners while offering robustness that will appeal to the most experienced drivers.
It is a magnificent, complete, and richly equipped 1/8 Brushless Buggy remote-controlled car.
2.15.1.0
- Ladder
- 1/8
- Engines
- Brushless engine
- Level of use/difficulty
- Intermediate
- Steering level
- Beginners
- Types of use
- Brushless
- Types of cars
- Radio controlled electric cars
- Product types
- Radio -controlled cars
Customers who bought this product also bought:
-
-€150.00
-
Promotion
Spare parts
Optional parts (Tuning)
Products you might like
-
-€50.00
-
Promotion
-
-€50.00
-
Promotion
-
-€100.00
-
Promotion
-
-€60.00
-
Promotion
-
-€30.95
-
Promotion
-
-€30.95
-
Promotion
